Filter
Top Products
4
To Watch a DVD:
•Press DVD Source on the front panel of the AVM 30.
• Select the TV input that corresponds to the one that the AVM 30’s Composite Video-Out/MAIN is
plugged into.
• Place a DVD into the DVD player and press play. You should see the picture on your TV and hear
sound from your speakers. Adjust volume using the Master Control Knob on the AVM 30.
To Watch a Video Tape:
•Press VCR Source on the front panel of the AVM 30.
• With your TV’s remote control, select the input that the AVM 30’s Composite Video-Out/MAIN is
plugged into.
• Insert a tape into the VCR and press play. You should see the picture on your TV and hear sound
from your speakers. Use the AVM 30 Master Control Knob on the front panel to adjust volume.
To Listen to a CD:
•Press CD Source on the front panel of the AVM 30.
• Place a CD into the CD player and press play. You should hear music coming from your speakers.
Use the AVM 30 Master Control Knob on the front panel to adjust volume.
Note about Digital and Analog Inputs:
•You can change any input to Digital or Analog. Digital inputs use the AVM 30’s high-end digital to
analog converters and can be changed from RCA to Toslink or XLR connection. Analog inputs can
be set to Digital Signal Processing for bass management, bass/treble control, time alignment, and
surround modes, or Direct to bypass all digital stages. Auto-Dig uses the digital connection if a
digital signal is sensed, and automatically switches to analog connection if there is no digital
signal. For more information see sections 4.2.1 and 7.4.5.
Note about Your Speakers:
• The AVM 30 allows you to enter information about how many speakers you have in your system,
as well as their relative size, type, and distance from your listening position. This speaker setup
information is important in directing audio signals optimally, ensuring you get the best quality
sound from your system – see sections 7.4.2, 7.4.3, and 7.4.4.
2.2 CONNECTOR DIAGRAMS AND DESCRIPTIONS
The following pages of illustrations contain a variety of standard cable/connectors that are used to connect
components to your AVM 30. The various types, and what they are used for, are shown here:
2. QUICK START continued …
Analog Left
Channel
RCA Black or
White
RCA Red
RCA Yellow
5-Pin
Mini DIN
Toslink
XLR Female
(connects to output)
XLR Male
(connects to input)
1/4” Stereo
Analog Right
Channel
Digital S/PDIF or
Composite Video
S-Video
Digital Audio
S/PDIF
Analog Balanced
or Digital AES/EBU
Analog Balanced or
Digital AES/EBU
Headphone
3.5mm
Mini (Mono)
Relay Trigger
IR Emitter
RCA Green:
Component Y
RCA Blue:
Component Pb
RCA Red:
Component Pr