Filter
Top Products
6 TASCAM TA-1VP
1 – Introduction
Thank you very much for purchasing the TASCAM TA-1VP
Vocal Producer.
Before connecting and using the unit, please take time to
read this manual thoroughly to ensure you understand
how to properly set up and connect the unit, as well as
the operation of its many useful and convenient functions.
After you have finished reading this manual, please keep
it in a safe place for future reference.
You can also download the Owner's Manual from the
TASCAM web site (http://tascam.com/).
Included items
The included items are listed below.
Take care when opening the package not to damage the
items. Keep the package materials for transportation in
the future.
Please contact the store where you purchased this unit
if any of these items are missing or have been damaged
during transportation.
Main unit (TA-1VP)
•
......................................................................1
AC adaptor (TASCAM PS-1225L)
•
............................................1
A rack-mounting screw kit
•
.......................................................1
A warranty card
•
........................................................................... 1
Owner’s manual (this manual)
•
...............................................1
About this manual
In this manual, we use the following conventions:
The names of keys and controls are given in the
•
following typeface: SAVE.
Messages on the unit’s display are shown like this:
•
ON
Additional information is introduced in the styles
•
below when needed:
NOTE
Explanation of actions in special situation and
supplement.
Trademarks
TASCAM is a trademark of TEAC Corporation, registered
•
in the U.S. and other countries.
Auto-Tune® and Antares® are registered trademarks of
•
Antares Audio Technologies in the United States.
Other company names, product names and logos
•
in this document are the trademarks or registered
trademarks of their respective owners.
All names of microphone manufacturers and
•
microphone model designations appearing in this
manual are used solely to identify the microphones
analyzed in the development of the respective
digital models and do not in any way imply any
association with or endorsement by any of the named
manufacturers.
Precautions for placement and
use
The operating temperature should be between 5°C and
•
35°C (41°F and 95°F).
Do not install in the following types of places. Doing
•
so could degrade the sound quality and/or cause
malfunctions.
Places with significant vibrations or that are
•
otherwise unstable
Near windows or other places exposed to direct
•
sunlight
Near heaters or other extremely hot places
•
Extremely cold places
•
Places with bad ventilation or high humidity
•
Very dusty locations
•
Locations exposed directly to rain or other water
•
Do not place any object on the unit.
•
Avoid installing this unit on top of any heat-generating
•
electrical device such as a power amplifier.
Beware of condensation
If the unit is moved from a cold to a warm place, or
used immediately after a cold room has been heated or
otherwise exposed to a sudden temperature change,
condensation could occur. Should this happen, leave the
unit for one or two hours before turning the unit on.
Cleaning the unit
To clean the unit, wipe it gently with a soft dry cloth. Do
not wipe with chemical cleaning cloths, benzene, paint
thinner, ethyl alcohol or other chemical agents to clean
the unit as they could damage the surface.