Filter
Top Products
BUILT-IN EFFECTS
The Radius 3000™ comes with eight built in effects. These effects can be used one at a time or you
may choose to overlap the effects and use up to four at a time. The Built-in effects include Scratch,
Filter, Echo, Trans, Skid, Phase, Flanger, and Pan. You can choose to use the effects with their default
parameters or you may choose to customize each effect by changing the parameters. The parameter
values for all the effects will range. Some effects will have more adjustable parameters than oth-
ers. The parameters have two adjustable values, PR (Parameter Ratio) and PT (Parameter Time). All
parameters will be reset to there default values when power is shut off!
©American Audio® - www.AmericanAudio.us - Radius 3000™ Instruction Manual Page 31
SCRATCH & SKID EFFECT: The Scratch Effect simulates real time
turntable scratching. Once the Scratch Effect has been activated the
JOG WHEEL (9) may be used in the same fashion a turntable platter
is used. Use the JOG WHEEL (9) to simulate the scratch motion on a
turntable platter and to manipulate playback. Both the Skid and Scratch
time parameters can be adjusted from 0010 to 9990. 9990 will give
you the longest Skid times. The Skid value ranges from a 10ms to ten
seconds.
Figure 43
Figure 42
BEAT SELECTION BANKS
6 - Refreshes on 4/1 Beat (every four beats)
5 - Refreshes on 2/1 Beat (every two beats)
4 - Refreshes on 1/1 Beat (every full beat)
3 - Refreshes on 3/4 Beat
2 - Refreshes on the 1/2 Beat
1 - Refreshes on the 1/4 Beat
BEAT SELECT BUTTONS (23): These buttons access the preset
banks for the parameters. All effects synchronized to the beat. Each
effect has a set of six built-in presets and one user programmable pre-
set. These presets are accessed by the BEAT SELECT BUTTONS (23).
To toggle between the banks tap on the arrow buttons. The chart on the
side defines the presets.