Filter
Top Products
BASIC OPERATIONS (CONT.)
1) You may press the IN BUTTON (15) on the fly (while a track is playing). This
will set a CUE Point without music interruption. Pressing the CUE BUTTON
(14) will now return you to the same point that you pressed the IN BUTTON
(15). You may now store this CUE Point in any of the BANK BUTTONS 1-4
(28).
2) You may also use the JOG WHEEL (9) to set a cue point. While a disc is
in PAUSE or CUE mode, use the JOG WHEEL (9) to scroll through a track
to find your desired starting point. Once you have found your desired posi-
tion press the PLAY BUTTON (13) to set your cue point. Pressing the CUE
BUTTON (14) or the IN BUTTON (15) will now return you to this exact point.
Figure 13
Figure 11
©American Audio® - www.AmericanAudio.us - Radius 3000™ Instruction Manual Page 20
10. SETTING and STORING a CUE POINT:
Setting A Cue Point:
A cue point is the exact point playback will begin when the PLAY/PAUSE BUT-
TON (13) is pressed. You may set your cue points anywhere on a disc or in a
track. You may set up to four independent cue points per disc. Four cue points
are stored in the BANK BUTTONS 1-4 (28). There are two (2) ways to set a CUE
point as detailed in figures 12 and 13.
Important Notice: When the Bank Button LED is flashing,
the unit will set the bank in point.
9. SCANNING (FAST FORWARD/FAST REVERSE)
This function gives you a fast search through a track. Press the SEARCH
BUTTONS (16) for a fast forward or a fast reverse search.
Figure 12