Filter
Top Products
©American Audio® - www.AmericanAudio.us - Radius 3000™ Instruction Manual Page 15
GENERAL FUNCTIONS AND CONTROLS (Cont.)
C. VFD DISPLAY PANEL (FIGURE 4)
42. PLAY INDICATOR - The play indicator will glow when the unit is in play mode.
43. PAUSE INDICATOR - The pause indicator will glow when the unit is in pause mode.
44. CUE INDICATOR - This indicator will glow when the unit is in CUE mode and will flash every time
a new CUE POINT is set.
45. TOUCH INDICATOR - This appears when anything touches the jog wheel.
46. FOLDER DISPLAY - This indicates which folder you are in.
47. CHARACTER DISPLAY - This will display the name of the track and album when a Mp3 disc is
loaded.
48. BPM METER - This meter will display the BPM's of the current track.
AUTO BPM - This will indicate that the AUTO BPM counter is active.
49. MEMORY BUCKET - This meter serves two functions.
1. The bucket outline indates your cue memory status. a full outline lets you know the cue memory is
full. Note: The search functions will not work unless all the bars are full.
2. The five bars inside the bucket represent the digital buffer. Each bar represents 2 seconds.
50. CD/SD/USB INDICATOR - This indicates which port is active. Use the CD/SD/USB SELECTOR
(1) to select your desired port.
51. TEMPO LOCK - This will indicate the Tempo Lock function is active.
52. PITCH INDICATOR - This meter will indicate how much pitch is either being applied or will be ap-
plied.
53. TIME BAR INDICATOR - This bar gives a visual approximation of a track's or disc's time This bar
will begin to flash when a track is ending. The flashing bar is great reminder, that time is running out
to get that next track ready to go.
54. TIME METER - These indicators will detail the current Minutes, Seconds, and Frames. The meter
FOLDER
TRACK
M
TOTALREM AIN
S
F
PI TCH
AUTO BPM
CD MP3
C UE
RELOO P
SI NGLE
AUTO CUE
Figure 4
42
59
58
57
52
51
50
4948
535455
4746454443
56