Filter
Top Products
INTERNAL MENU
©American Audio® - www.AmericanAudio.us - Radius 3000™ Instruction Manual Page 17
Press and hold the FOLDER KNOB (20) for at least 2 sec. to enter the internal menu, and turn the FOLDER
KNOB (20) to search through the different menus. Turn either the RATIO (25) or TIME (31) KNOBS to change
the submenus; press the FOLDER KNOB (20) to save your settings and exit the menu.
1. JOG MODE - Select JOG LED mode (mode range is 1~8)
2. PLAYLIST - Normal/Title/Artist/Album/Genre (for USB or SD only)
3. Sensitivity - Touch Wheel Sensitivity Adjustment (Adjustment range is -20~+20)
4. Pitch Bend - Pitch range +/-1%~100%
5. Display Time - Range is 0.5~12.0 sec.(LINE NAME start / stop time adjustment)
6. Scroll Speed- Range is 50~2000msec. (Line Name Move Time Adjustment)
7. Sleep Time - No sleep, 5~120 min
8. INTENSITY - VFD Brightness (Brightness Range is 1~4)
9. A.CUE LEVEL - Change the AUTO CUE Level (Level Range is -36~-78db)
A. Line Setup - Press either the TIME or RATIO knobs to select VFD line name mode and display.
B. MIDI CC TYPE - Change the send of REL.(RELATIVE), ABS.(ABSOLUTE), Note for
FOLDER/TRACK/PARAMETER TIME/PARAMETER RATIO/ PITCH under MIDI
mode. PITCH is sent by BEND(PITCH BEND)/ ABS.(ABSOLUTE).
C. MIDI CH - Change Chan 1~16 or control Chan(1~8,9~16) by BEAT of CH1/CH2 by P. Button
D. MIDI SETUP - -USB = MIDI/Link (USB MIDI JACK function)
-JOG OUTPUT (0~30 ms) (Control JOG MIDI max. send time)
-Pulse = (1024 or 512) (select sensor to send Pulse)
-I/O DISPLAY/Hide (display/hide MIDI I/O value)
-NAME = 3000 (B~H) (2 more devices connection)
-EDIT = ON/OFF (Set MIDI NOTE and MIDI LED code on/off; ON - default value)
E. Dual Control - In MIDI mode the unit can be controlled by the JOG WHEEL, PITCH BEND,
PITCH ON/OFF, PITCH SLIDER, & PITCH PERCENTAGE.
F. MIDI NOTE EDIT - Edit the send MIDI NOTE code (Please refer to MIDI MAP)
G. MIDI LED EDIT - Edit the received MIDI LED code (Please refer to MIDI MAP)
H. REPEAT MODE - Play FOLDER repeat
I. Bit Rate - Disp ON
Disp OFF
J. Version - CON: VerXX (Control version)
- SER: VerXX (Servo version)
- BUF: VerXX (Buffer vesion)
- DSP: VerXX( DSP version)
K. Load Defaults - Press the Time or Ration Knobs to enter load defaults.
L. EXIT & SAVE - Exit & Save setting to next power on (Press the Memory Button to fast exit & save in any
operating mode)
Note:
Save: PITCH ON/OFF, PITCH RANGE, SGL/CTN, AUTO CUE, TIME MODE, HOLD, KEY LOCK,
EFFECTS ON/OFF, SENITIVITY, DISPLAY/SCROLL TIME/JOG MODE/ INTENSITY/ A.CUE LEVEL/
MIDI CC TYPE/ MIDI CH/ MIDI SETUP
Defaults: PITCH (ON), PITCH RANGE (8%), (CTN), AUTO CUE(ON), TIME MODE (REMAIN),
HOLD(OFF), KEY LOCK(OFF), EFFECTS(OFF), SENITIVITY(0), DISPLAY(3 secs)/ SCROLL SPEED(400msec)
TIME, PITCH BEND(PITCH RANGE), BIT RATE(Disp. ON), JOG MODE(MODE1,6),
INTENSITY(4), A. CUE LEVEL(-48db), MIDI CC TYPE(REL.) PITCH(BEND), MIDI CH(CH 1), MIDI
SETUP(JOGOUT 0 ms) (PULSE 1024) (I/O HIDE), REPEAT MODE (OFF), DUAL CONTROL (OFF), LINE
SETUP (MODE=1, LINE 1 DISPLAY=2/LINE 2 DISPLAY=1), PLAYLIST (NORMAL), SLEEP TIME (15min)