Filter
Top Products
SETTING A NEW EQUALIZATION CURVE
MANUALLY
The equalization curve can be customized to suit your preference.
1
Press FREQ DOWN or FREQ UP.
2 Within 4 seconds, press FREQ DOWN or FREQ
UP repeatedly to select the frequency you want
the
4 Repeat steps 2 and 3 to complete the equalization
curve.
To cancel the graphic equalizer
Press GEQ once or twice so that “ GEQ OFF appears on the
display of the stereo receiver.
When using the remote control, press GEQ repeatedly until “GEQ
OFF is displayed.
1,3 1 2,4
Up to 5 customized equalization curves can be stored as the
manual modes Ml - M5.
7 Set a new equalization curve with FREQ DOWN, ~! ~
FREQ UP and MULTI JOG.
f
‘<.g
?.~
See
“SETTING A NEW EQUALIZATION CURVE MANUALLY”. u
The created curve is displayed for 8 seconds.
a
.m
2 Within 4 seconds, press ENTER.
“M 1“ indicator flashes on the display for 4 seconds.
● If this step is not completed within 4 seconds, press GEQ
first to display “GEQ ON”. Then press ENTER within 4
seconds.
3 Within 8 seconds, turn MULTI JOG to select one
of the manual modes Ml - M5 to store the curve.
4 Within 8 seconds, press ENTER.
The new equalization curve is stored.
To select the stored equalization curve
Press GEQ, and turn MULTI JOG to select one of the manual
modes Ml - M5 within 4 seconds.
ENGLISH 9