Filter
Top Products
IMPORTANT
Check your system and accessories
@
@
A
h.
@
@
@ DX-NMI 000 Compact disc player
@ FX-NM1 000 Stereo cassette deck
@ GE-NMIOOO Graphic equalizer
@ MX-NMI 000 Stereo receiver
@ SX-NMT1 000 Front speakers
Remote control
AM antenna FM antenna
Operating Instructions, etc.
Setting
up the, units
Place the units horizontally as the illustration above.
When placing them vertically, refer to the illustration as follows.
● Do not place the stereo cassette deck on the CD player. The
top window of the CD player may be damaged.
● Make sure that the stereo cassette deck is placed on the left
side of the stereo receiver.
It may generate some noises or may prevent the stereo system
from proper functioning if the stereo cassette deck is placed on
the right side of or on the stereo receiver, or if the stereo receiver
is placed on the stereo cassette deck.
Connect the speakers, antennas, and all optional equipment first.
Then connect the AC cord in the end.
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel of the
stereo receiver is 120V AC. Check that the rated voltage matches
your local voltage.
Speakers
The speaker placed on the right side of the unit facing you is
“the right speaker” and the other one is “the left speaker”.
1
.
2
3
Connect the flat cables of DX-NM1OOO @ , FX-
NM1OOO@ and GE-NM1OOO @ to MX-NMIOOO.
Push the connector until it clicks.
Connect the speaker cords to the SX-NMTI 000
front speakers.
Connect the cords with the white stripes to @ terminals and
the other cords to @ terminals.
Connect the speaker cords to MX-NM1 000.
Connect the cords with the white stripes to @ terminals and
the other cords to ~ terminals.
4 ENGLISH