Filter
Top Products
The DSP (Digital Signal Processor) SURROUND adjusts the
delay time, the input mode and the feedback level to give a
resonant surround sound, allowing you to enjoy the real sound
presence of different environments.
This unit has been programmed with 5 different SURROUND
modes, You can also create and memorize up to 5 of your own
surround settings.
SELECTING A PROGRAMMED DSP
SURROUND MODE
MULTI JOG
SURROUND
When you select the programmed DSP SURROUND mode, the
sound presence of a disco (DISCO), live music performance
(LIVE), movie theater (MOVIE), concert hall (HALL) or arena
(ARENA) can be chosen.
Press SURROUND, and turn MULTI JOG to select
the desired Programmed mode within 4 seconds.
The DSP SURROUND mode is displayed cyclically as follows.
~ DISCO— LIVE — MOVIE — HALL— ARENA~
L
‘------------ Programmed mode ------------:
DSP
DSP
DSP
DSP
DSP
M5 —
M4 — M3 — M2 —
Ml
J
‘----------------Manual mode -------------:
Equalization curves are selected automatically to match the
programmed DSP SURROUND modes, For the manual mode,
the corresponding number of the manual GEQ mode is selected.
To cancel DSP SURROUND
Press SURROUND once or twice so that “DSP OFF” appears
on the stereo receiver.
When the music source is monaural
Select “LIVE” or “MOVIE to obtain a simulated stereo effect,
When “DISCO,
“HAL~ or “ARENA is selected, no sound will
be heard from the connected surround speakers. (The surround
speakers are not supplied. See page 30.)
The elements of the DSP SURROUND sound can be customized.
MULTI JOG
DELA; TIME EFF’ECT
DELAY TIME (delay time)
Increasing the number in the display increases the delay time
and surround effect.”1 5“,”
20, “30, “50, “100 or “140” msec
can be selected.
To
adjust the delay time
Press DELAY TIME, and turn MULTI JOG to select one of
the levels within 8 seconds.
L-R, L+R
(inmt mode)
When “L+R” is displayed, the surround effect increases,
especially in the center.
When “L-R is displayed, it increases on the outside.
To select an input mode
Press EFFECT ~, and turn MULTI JOG to select “L-R or
“L+R within 8 seconds.
FB (feedback level)
Increasing the number in the display increases the echo.
A level from “OFF (0) to “7” can be selected.
To adjust the level of feedback
Press EFFECTw, and turn MULTI JOG to select one of
the levels within 8 seconds,
To cancel DSP SURROUND
Press SJJRROUND once or twice so that “DSP OFF appears
on the stereo receiver.
1() ENGLISH