Filter
Top Products
Setting this unit to power economizing mode reduces power
consumption as follows.
● When the power is turned off, all the display lights turn off, and
only the indicator on the POWER button lights.
However, if the clock is not set, the game Demo (page 8), will
begin when the power is turned off.
● If CD or tape does not play for 10 minutes or if there is no
audio input from any connected external equipment for 10
minutes when VIDEO/AUX or PHONO is selected as the
source, the power
ShlJk off.
● The display brightens only when operating the unit. When the
unit has not been used for 10 seconds, the brightness level
switches to the mode previously selected in “DIM MODE”. (Page
6)
(If the display brightness level is set to “DIM-OFF”, the
brightness does not change. When the level is “DIMMER 3“,
the button lamps are also turned off.)
1
2
3
Press ECO.
“ECO MODE” will be displayed.
Press ENTER wiithin 4 seconds.
The current power-economizing mode status will be displayed.
If the power-economizing mode is OFF: ECO OFF
If the power-economizing mode is ON: E=COON
Turn
MULTI JOG within 4 seconds to switch the
power-economizing mode on or off.
Examp/e: When “ON” is selected
The mode will be automatically set after 4 seconds. It will
also be set if ENTER is pressed within 4 seconds after step
3.
Standby power consumption
If the power-economizing mode is OFF: 31 W
If the power-economizing mode is ON: 2.5 W
m
To view the clock, press CLOCK so that the time is displayed for
4 seconds.
To provide reinforcement for the ultra-low frequencies, in addition
to the Left/Right 2-channel amplifier used to reproduce mid-to-
high-range frequencies, this system incorporates a second L/R
2-channel amplifier just for reproduction of ultra-low frequencies
—
making it, in effect, a 4-amplifier system. By utilizing discrete
amplifiers for mid to-high-frequencies and low frequencies, high-
quality sonic reproduction that is virtually free from distortion
can be realized.
This Multi Amplifier System, which utilizes independent circuitry
for the different frequency ranges, enables superb sonic
reproduction free from distortion.
,-”.,’:,,,,., ., ~,,,, ,, =..- -,-: h. EH,=, ?...,=..,,’. ,’, .-.,.,’ ,.!, -. !’.-,’
BUILT-IN SUBWOOFER SYSTEM
The built-in subwoofer system has a separate subwoofer cavity
area that is part of the loudspeaker cabinet structure, which acts
as a sonic filter to cut distortion components. (In the Multi Amplifier
System, the ultra-low frequency signals transmitted from their
own independent amplifier are reproduced in this area.) This
separate construction gives a clear, rich definition to bass
reproduction and it can realize clear, well-defined mid-to-high
frequency signals,
And AlWA’s built-in subwoofer system incorporates a subwoofer
capable of powerful, satisfying bass performance with true stereo
separation.
‘@ui!Gin$Mb$ogfer
~Mtilk-Arn~ifier
Amplifiers for Mid-to-high
range frequencies
—
Subwoofer’Cavity area
Amplifiers for
Low frequencies
ENGLISH
7