Aiwa Z-L70 Stereo System User Manual


 
& -—. —.
The unit can store a total of 32 preset stations for all bands.
When a station is stored, a preset number is assigned to the
station. Use the preset number to tune in to a preset station
directly.
7 PressTUNER/BAND to select a band, and tune in
to a station with + DOWN or -UP.
2 Press I I SET to store the station.
A preset number beginning from 1 in consecutive order for
each band is assigned to a preset station.
Frequency
Preset number
3 Repeat steps 1 and 2.
No more stations will be stored if a total of 32 preset stations
have already been stored.
1 Press TUNER/BAND to select a band.
2 Press numbered buttons O-9 and +1Oto select a
preset number.
Example:
To select preset number 20, press +1O,+1Oand O.
To select preset number 15, press +10 and 5.
Selecting a preset number on the main unit
Press TUNER/BAND to select a band. Press TUNER PRESET
repeatedly until the preset number flashes (preset tuning mode),
and turn MULTI JOG. The preset numbers are selected in
sequence as you turn MULTI JOG.
+> PRESET is also available to select the preset number.
Each time the button is pressed, the next highest number is
selected.
To clear a preset station
Select the preset number of the station to be cleared with the
numbered buttons. Then, press
CLEAR, and press IISET
within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are decreased by one.
When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.
“FULL” is displayed if you attempt to store more than 32 preset
stations.
12 ENGLISH