The unit can be turned off automatically at a specified time.
Use the remote control.
1
2
Press SLEEP on the remote control.
Within 4 seconds, turn MULTI JOG or press +
or > to specify the time until the power is
turned off.
The time changes between 5 and 240 minutes in 5-minute
steps.
Specified time
I
To check the time remaining until the power turns off
Press SLEEP once. The remaining time is displayed for 4
seconds.
To cancel the sleep timer
Press SLEEP twice so that “SLEEPoFF appears.
5 L ‘- ‘---
“- u
The unit can be turned on at a specified time every day with the
built-in timer.
Preparation
Make sure the clock is set correctly.
1
Press one of the function buttons to select a
source.
2 Press TIMER repeatedly until @ appears on the
3 Within 6 seconds, turn MULTI JOG to designate
the timer-on time, then press ENTER or 11.
Turning MULTI JOG changes both the hour and the minute.
+ or *is also available instead of MULTI JOG. Holding
these buttons down will vary the time rapidly.
4 Within 4 seconds, turn MULTI JOG to select the
duration for the timer-activated period.
The duration can be set between 5 and 240 minutes in 5-
minute steps.
+ or - is also available instead of MULTI JOG.
The duration will be automatically set after 4 seconds. It will
also be set if ENTER or II is pressed within 4 seconds after
step 4.
(To be continued)
ENGLISH 25