Filter
Top Products
5-4
Servicing
General Information
General Information
Whenever you contact Agilent Technologies about your Agilent 83430A, have
the complete serial number and option designation available. This will ensure
you obtain accurate service information.
• Refer to Table 5-1 for a list of internal labels.
• Refer to Table 5-2 on page 5-5 for a list of service tools.
• Refer to “Major Assemblies and Cables” on page 5-5 for the location of each ma-
jor assembly and cable.
Clean the cabinet using a damp cloth only.
Protect against ESD damage
Electrostatic discharge (ESD) can damage or destroy electronic components.
All work on electronic assemblies should be performed at a static-safe work
station. Refer to “Electrostatic Discharge Information” on page 5-7 for more
information on preventing ESD.
WARNING
Improper internal adjustments may change the laser classification of
this instrument. Always perform the adjustments as described in
“Adjustment Procedures” on page 5-36 after changing any assemblies.
Table 5-1. Internal Labels
This label warns you about hazardous voltages present
on the power supply. Use extreme caution.