96
Setup Menu
Chapter 7 Menus
3
Use the PUSH SET(S.SEL) knob or the +/– function
button (F3 or F4) to change the setting.
4
To change other settings, press the PUSH SET(S.SEL)
knob or the SELECT function button (F2) to return to
the previous screen, then repeat steps 1 to 3.
5
When you have completed the settings, press the
SAVE function button (F5).
The message “NOW SAVING...” appears on the video
monitor display, and “Saving...” appears in the time
data display area, while the new settings are saved in
memory. When the saving operation is completed, the
video monitor display and the time data display area
return to their normal indications.
• If you power off the unit before a save operation is
completed, settings may be lost. Wait until the save is
completed before powering off the unit.
• If, instead of pressing the SAVE function button (F5),
you press the MENU button, the new settings are not
saved. The message “ABORT !” appears on the video
monitor display and “Abort !” in the time data display
area for about 0.5 seconds, and the system exits the
menus. To change more than one setting, be sure to press
the SAVE function button (F5) after making the settings.
To return menu settings to their factory
default settings
After changing menu settings, use the following procedure
to return the settings to their factory default settings
(setting initialization).
To return a particular setting to its factory default
setting
In the screen that selects the setting of that item, press the
RESET/RETURN button.
For example, proceed as follows to return the 005
DISPLAY INFORMATION SELECT item to its default
setting. This assumes that the setting has been changed
from the factory default “time data & status” in step 3 of
the procedure in “To change the settings of menu items”
(page 95).
1
Press the RESET/RETURN button.
“time data & status” (factory default setting) is
selected.
2
Press the PUSH SET(S.SEL) knob.
The setting returned to its factory default is saved in
memory as the current setting.
To return all settings to their factory default
settings
1
Press the MENU button to display the setup menu.
2
Press the RESET/RETURN button.
A message appears, to confirm whether you wish to
return all settings to their factory default settings.
3
Press the SAVE function button (F5).
The message “NOW SAVING...” appears on the video
monitor display, and “Saving...” appears in the time data
display area, while the settings of all items are returned to
their factory default settings. These factory default settings
are saved in memory. If you power off the unit while
settings are being saved, settings may not be correctly
returned to their factory default settings. Wait until the
saving is completed before powering off the unit.
To abandon the resetting operation
Instead of pressing the SAVE function button (F5), press
the RESET/RETURN button. The display returns to the
top level of the setup menu, leaving the settings
unchanged.
Items in the extended menu
The following tables show the items in the extended menu.
Notes
ITEM-005
DISPLAY INFORMATION
SELECT
time data & CNT
Current setting
Message on the video
monitor display
Initialize all items to factory
preset values?
Message in the time data
display area
Init setup?
