120
Troubleshooting
Appendix
a) Displayed only when setup menu item 016 ALARM DISPLAY is set to
“on”.
b) Displayed only when setup menu item 016 ALARM DISPLAY is set to
“on” or “limit”.
During recording and editing operations
a) Displayed only when setup menu item 016 ALARM DISPLAY is set to
“on” or “limit”.
During playback
a) Displayed only when setup menu item 016 ALARM DISPLAY is set to
“on” or “limit”.
Index File! UNSUPPORT INDEX FILE.
DISC CANNOT BE RECORDED TO.
Use another disc.
File System CURRENT VERSION OF THE
SOFTWARE SETS THE DISC WRITE
PROTECTED.
This appears when you insert a disc that can be
played back but not recorded.
Exchange the disc for one with a file system
supported by this unit. Or format the disc
(see
page 72)
.
FILE SYSTEM ON THE DISC INHIBITS
WRITING.
Loading!
a)
LOADING. This appears if you press a button while a disc is
loading. Wait until the disc has finished loading and
try again.
Unloading!
a)
UNLOADING. This appears if you press a button while a disc is
unloading.
Wait until the disc has finished unloading and try
again.
Clip lock! CLIP IS LOCKED.
UNLOCK CLIP IN THUMBNAIL MENU.
This appears when an operation is attempted on a
locked clip.Use the Thumbnail Menu to unlock the clip
(see page 63)
and try again.
Alarm message in time
data display area
Alarm message in video monitor screen Description/action
Alarm message in time
data display area
Alarm message in video monitor screen Description/action
Input Sig!”
a)
INPUT SIGNAL FREQUENCY IS NOT
THE SAME AS THE SYSTEM SETUP.
This appears when an input signal does not match
the system frequency of this unit.
Input a signal that matches the system frequency, or
change this unit’s system frequency setting
(see
page 25)
.
ILL. REC!
a)
ENCODING DOES NOT SYNCHRONIZE
WITH REF VIDEO.
Check the signals being input to this unit.
ILL. REF!
a)
INPUT VIDEO SIGNAL DOES NOT
SYNCHRONIZE WITH REF VIDEO
SIGNAL.
USE COMMON REFERENCE SIGNAL
OR CONNECT RECORDER REF OUT TO
PLAYER REF IN.
Input a reference signal synchronized with this unit’s
system frequency.
MEM. Full!
a)
MEMORY FULL !! Check the disc being recorded by this unit.
Recording NOW RECORDING ... Wait for recording to finish.
Alarm message in time data
display section
Alarm message in monitor video
section
Description/action
ILL. PLAY!
a)
ILLEGAL PLAYBACK. Check the disc being played by this unit.
MEM. Empty!
a)
MEMORY EMPTY !! Check the disc being played by this unit.
Disc Error! DISC ERROR DETECTED. Use another disc.
