105
Setup Menu
Chapter 7 Menus
827 AES/EBU AUDIO OUTPUT SELECT Select the audio signals to assign to AES/EBU audio output channels.
Sub-item
1 CH1/CH2 tr1/2
: Tracks 1 and 2 assigned to audio output channels 1 and 2.
tr3/4: Tracks 3 and 4 assigned to audio output channels 1 and 2.
tr5/6: Tracks 5 and 6 assigned to audio output channels 1 and 2.
tr7/8: Tracks 7 and 8 assigned to audio output channels 1 and 2.
2 CH3/CH4 tr1/2: Tracks 1 and 2 assigned to audio output channels 3 and 4.
tr3/4
: Tracks 3 and 4 assigned to audio output channels 3 and 4.
tr5/6: Tracks 5 and 6 assigned to audio output channels 3 and 4.
tr7/8: Tracks 7 and 8 assigned to audio output channels 3 and 4.
828 SDI AUDIO OUTPUT SELECT Select the audio signals to assign to SDI audio output channels.
Sub-item
1 CH1/CH2 tr1/2
: Tracks 1 and 2 assigned to audio output channels 1 and 2.
tr3/4: Tracks 3 and 4 assigned to audio output channels 1 and 2.
tr5/6: Tracks 5 and 6 assigned to audio output channels 1 and 2.
tr7/8: Tracks 7 and 8 assigned to audio output channels 1 and 2.
2 CH3/CH4 tr1/2: Tracks 1 and 2 assigned to audio output channels 3 and 4.
tr3/4
: Tracks 3 and 4 assigned to audio output channels 3 and 4.
tr5/6: Tracks 5 and 6 assigned to audio output channels 3 and 4.
tr7/8: Tracks 7 and 8 assigned to audio output channels 3 and 4.
834 AUDIO INPUT LEVEL Select the analog audio input source.
Sub-item
1 CH1 line
: Line input
mic: Microphone input
2 CH2 line
: Line input
mic: Microphone input
839 AUDIO AGC/LIMITER MODE For automatic input level adjustments performed on the analog audio
signals recorded on channels 1 and 2, select whether to perform the
adjustments in stereo mode or independently for channels 1 and 2.
mono
: Perform automatic adjustments independently for channels 1 and
2.
stereo: Perform automatic adjustments in stereo mode.
840 AUDIO AGC SELECT Set the AGC saturation level.
off
: AGC does not operate.
–6dB, –9dB, –12dB, –15dB, –17dB: AGC operates when the
VARIABLE switch is set to PRESET.
Note
This setting is valid only for channels where “mic” is selected with setup
menu item 834 AUDIO INPUT LEVEL. Regardless of this setting, AGC is
“off” for channels where “line” is selected.
841 AUDIO LIMITER SELECT Select the limiter saturation level, for limiting large input signals, for use
in manual adjustment of audio input levels.
off
: The limiter does not operate.
–6dB, –9dB, –12dB, –15dB, –17dB: The limiter operates when the
VARIABLE switch is set to PRESET.
Note
This setting is valid only for channels where “mic” is selected with setup
menu item 834 AUDIO INPUT LEVEL. Regardless of this setting, the
limiter is “off” for channels where “line” is selected.
Menu items in the 800s, relating to audio control
Item number Item name Settings
