20
Front Panel
Chapter 2 Names and Functions of Parts
When there is no display, the unit is synchronizing to the
internal reference signal.
INPUT: Input video
HD REF: HD-format reference signal
SD REF: SD-format reference signal
The HD REF or SD REF display flashes when the video
input signal is not synchronized to the reference signal, and
when the signals are synchronized but their phases do not
match.
i Video input display
This displays the currently selected video input signal.
HDSDI: HDSDI video input
The HDSDI display blinks when there is no video
input signal, and when the video input signal does not
match the system frequency of this unit.
SG: Test video signal from the internal signal generator
The video signal input is selected with V INPUT on
page P1 VIDEO of the function menu (see page 40).
Video monitor display
When you press the DISPLAY button, the display window
changes to the video monitor display.
A Audio level meters: LEVEL MT on page P2 AUDIO
of the function menu decides whether the meter is to
be displayed and on which side, left or right, it is
displayed in the display window.
B Superimposed information: Appears when CHAR
SEL on the HOME page of the function menu is set to
“ON” or “LCD”.
C Low battery warning: Appears and flashes during
operation with a battery pack when the battery power
is almost exhausted.
D Down-converter display: Displays the down
converter mode set with the setup menu item 930
DOWN CONVERTR MODE.
DC-EC: Edge-crop mode
DC-LB: Letter box mode
DC-SQ: Squeeze mode
Note
Note
0
-10
-20
-30
-60
-40
1 2
0
-10
-20
DC-SQ
-30
-60
-40
3 4
TCR.00:45.39.18*
JOG STILL
A Audio level meters
B Superimposed information
C Low battery warning
D Down-converter display
