455
SonicOS 5.8.1 Administrator Guide
CHAPTER 33
Chapter 33: Configuring Modem
modem
Modem
The following sections describe how to configure and use the modem functionality on a
SonicWALL UTM appliance:
• “Modem > Status” on page 455
• “Modem > Settings” on page 456
• “Modem > Advanced” on page 457
• “Modem > Connection Profiles” on page 459
Modem > Status
The Modem > Status page displays dialup connection information when the modem is active.
You create modem Connection Profiles in the Modem Profile Configuration window, which
you access from the Modem > Connection Profiles page.
In the Modem Status section, the current active network information from your ISP is displayed
when the modem is active:
• WAN Gateway (Router) Address
• WAN IP (NAT Public) Address
• WAN Subnet Mask
• DNS Server 1
• DNS Server 2
• DNS Server 3
• Current Active Dial-Up Profile (id)
• Current Connection Speed
