Two types of aircraft programming are available with
the XP662, airplane (AC) and helicopter (HE). When
you enter the model type selection function, the
current model type will appear on the screen. (The
current model type being the factory preset or the
last model used.) When you press the increase or
decrease button to change the model type, the new
model type indicated on the screen will flash. For
example, if the current model type is AC and you
change to HE, “HE” will flash on the screen. The
flashing alerts you to the change of model type and
will stop once you move to the next function or exit
the system mode.
1. Press the SCROLL and INCRESE buttons
simultaneously and hold.
2. Turn on the transmitter to enter the system mode.
3. Press the SCROLL button until “TYP” appears on
the screen.
4. Press the INCREASE or DECREASE button until
the desired model type appears on the screen
(AC = airplane HE = helicopter).
5. Press the SCROLL button to access the Data
Reset function.
6. To exit, press the SCROLL and INCREASE
buttons simultaneously.
MODEL TYPE SELECTION
6.1
Press the SCROLL button until
“TYP”appears on the screen.
Press either the INCREASE or DECREASE
buttons until the desired model type (AC or HE)
appears on the screen.
