Yamaha RX-V1000 Stereo System User Manual


 
43
EnglishINTRODUCTION PREPARATION
BASIC OPERA-
TION
ADVANCED
OPERATION
ADDITIONAL
INFORMATION
APPENDIX
SET MENU
13 SP DELAY TIME
Use this feature to adjust the delay of the center and rear
center channel sounds. This feature works when this unit
decodes a Dolby Digital or DTS signal. Ideally, the center
speaker and rear center speaker should be the same
distance from the listening position as the left and right
main speakers. However, in most home situations, the
center speaker or the rear center speaker is placed in line
with the main speakers or rear speakers. By delaying the
sound from the center speaker and the rear center speaker,
the apparent distance from the center speaker and the rear
center speaker to the listening position can be adjusted to
make it seem the same as the distance between the left
and right main speakers and the left and right rear
speakers to the listening position. Adjusting the delay
time for the center speaker is especially important for
giving depth to the dialog.
Control range (ms): 0 to 5 for the center speaker
0 to 30 for the rear center speaker
y
Increasing the delay by 1 ms simulates moving the speakers
about 30 cm (one foot) farther away from the listening
position.
11 DTS LFE LEVEL
This setting is effective only when this unit decodes DTS
signals.
Use this feature to adjust the output level of the LFE
(low-frequency effect) channel when playing back a DTS
signal. The LFE signal carries the low-frequency special
effect sound which is only added to certain scenes.
Control range (dB): –10 to +10
Initial setting: 0 dB for both SPEAKER and
HEADPHONE
Note
Adjust the LFE level according to the capacity of your
subwoofer or headphones.
12 6.1/ES AUTO
Use this feature to switch the audio mode of the Dolby
Digital Matrix 6.1 or DTS ES decoder on or off.
Choices: ON, OFF
Initial setting: ON
ON
Select this to allow this unit to automatically turn on the
Dolby Digital Matrix 6.1 or DTS ES decoder when a
signal with the appropriate identification is detected.
OFF
Select this if you want to turn on or off the Dolby Digital
Matrix 6.1 or DTS ES decoder manually by pressing 6.1/
ES on the remote control.
L
C
C
RC
R
RL
RR
RC
Center speaker image
Rear center speaker image
0107V1000_36-46_EN 8/29/0, 1:35 PM43