Filter
Top Products
39
EnglishINTRODUCTION PREPARATION
BASIC OPERA-
TION
ADVANCED
OPERATION
ADDITIONAL
INFORMATION
APPENDIX
SET MENU
■ 1D REAR CT SP (rear center
speaker mode)
By adding a rear center speaker to your speaker
configuration, the unit can provide more realistic front-to-
back and back-to-front transitions.
Choices: LRG (large), SML (small), NONE
Initial setting: NONE
LRG
Select this if you have a large rear center speaker. The
entire range of the rear center channel signal is directed to
the rear center speaker.
SML
Select this if you have a small rear center speaker. The
low-frequency signals (90 Hz and below) of the rear
center channel are directed to the speakers selected with
“1E LFE/BASS OUT”.
NONE
Select this if you do not have a rear center speaker. All of
the rear center channel signals are directed to the left and
right rear speakers.
■ 1E LFE/BASS OUT (bass out
mode)
LFE signals carry low-frequency effects when this unit
decodes a Dolby Digital or DTS signal. Low-frequency
signals are defined as 90 Hz and below.
Choices: SWFR (subwoofer), MAIN, BOTH
Initial setting: BOTH
SWFR
Select this if you use a subwoofer. The LFE signals are
directed to the subwoofer.
MAIN
Select this if you do not use a subwoofer. The LFE
signals are directed to the main speakers.
BOTH
Select this if you use a subwoofer and you want to mix
the main channel low-frequency signals with the LFE
signals.
Note
• The low-frequency signals (90 Hz and below) from all main,
center, rear and rear center (see page 17) channels are directed
to the LFE channel when you select the small speaker setting in
items 1A, 1B, 1C and 1D.
1D REAR CT SP
LRG
SML
NONE
1D REAR CT SP
LRG
SML
NONE
1D REAR CT SP
LRG
SML
NONE
1E LFE/BASS OUT
SWFR
MAIN BOTH
1E LFE/BASS OUT
SWFR
MAIN BOTH
1E LFE/BASS OUT
SWFR
MAIN BOTH
0107V1000_36-46_EN 8/29/0, 1:35 PM39