Filter
Top Products
17
EnglishINTRODUCTION PREPARATION
BASIC OPERA-
TION
ADVANCED
OPERATION
ADDITIONAL
INFORMATION
APPENDIX
CONNECTIONS
SPEAKERS PRE OUT/MAIN IN
MAIN
CENTER
REAR
(SURROUND)
MAIN
IN
MAIN
OUT
REAR
CENTER
CENTER
SUB
WOOFER
R L
LR
R
+
–
L
R L
A
+
–
–
+
+
– –
+
B
REAR
(SURROUND)
MAIN A OR B: 4
MIN. /SPEAKER
A
+
B: 8
MIN. /SPEAKER
CENTER
: 6
MIN. /SPEAKER
REAR
: 6
MIN. /SPEAKER
MAIN A OR B: 8
MIN. /SPEAKER
A
+
B:
16
MIN. /SPEAKER
CENTER
: 8
MIN. /SPEAKER
REAR
: 8
MIN. /SPEAKER
IMPEDANCE SELECTOR
SET BEFORE POWER ON
SWITCHED
100W MAX. TOTAL
AC OUTLETS
VOLTAGE SELECTOR
Main speakers A
Right Left
Main speakers B
Right Left
(General model)
Center speaker Subwoofer
system
Subwoofer connection
See “SUBWOOFER jack”
on page 18.
Rear speakers
Right Left
Rear center
speaker
Power
amplifier
■ Using the rear center speaker
You can enjoy the Dolby Digital Surround EX software or DTS ES software by adding the rear center speaker to the 5-
speaker configuration.
Rear center speaker placement
Place the rear center speaker in the center between the left and right rear speakers at the same height from the floor as
the rear speakers.
Connecting the rear center speaker
1 Connect the PRE OUT REAR CENTER jack on this unit to the input jack on the separately
prepared power amplifier.
2 Connect the rear center speaker to the speaker terminals on this power amplifier.
Note
• Be sure to correctly connect the + terminal of the speaker to the + terminal on the power amplifier, and the – terminal of the speaker
to the – terminal on the power amplifier.
Setting up this unit for using the rear center speaker
When you use a rear center speaker, “1D REAR CT SP” on the SET MENU must be set to LRG or SML (see page 39).
Note
• No sound is output from the rear center speaker when “1C REAR L/R SP” on the SET MENU is set to NONE (see page 38 for
details).
0103V1000_11-18_EN 8/29/0, 1:33 PM17