Filter
Top Products
90
SET MENU
• “CENTER”, “SUR. L”, “SUR. R”, “SB L”, “SB R”, “SWFR”,
“PRNS L” and “PRNS R” cannot be adjusted if “CENTER SP”
(see page 87), “SUR. L/R SP” (see page 87), “SUR. B L/R SP”
(see page 87), “LFE/BASS OUT” (see page 88) and
“PRESENCE SP” (see page 87) are set to “NONE”
respectively.
• Instead of “SB L” and “SB R”, “SUR. B” is displayed if “SUR.
B L/R SP” is set to either “SMLx1” or “LRGx1” (see page 87).
■ Center graphic equalizer D)EQUALIZER
Use this feature to select the parametric equalizer or the
graphic equalizer.
Equalizer select EQ TYPE SELECT
Use this feature to select the type of equalizer.
Choices: AUTO PEQ, CENTER GEQ, EQ OFF
• Select “AUTO PEQ” to use the parametric equalizer
adjusted in “AUTO SETUP” (see page 32).
• Select “CENTER GEQ” to adjust the built-in 5-
frequency band graphic equalizer for the center speaker
so that the tonal quality of the center speaker matches
that of the front left and right speakers.
• Select “EQ OFF” to deactivate the equalizing feature.
• “AUTO PEQ” is automatically selected when you run “AUTO
SETUP” (see page 32).
• If you press u / d while “CENTER GEQ” is selected, the
OSD changes to the following screen.
Center graphic equalizer CENTER GEQ
When you select “CENTER GEQ” in “EQ TYPE
SELECT”, use this feature to adjust the built-in 5-
frequency band (100Hz, 300Hz, 1kHz, 3kHz and 10kHz)
graphic equalizer for the center channel so that the tonal
quality of the center speaker matches that of the front left
and right speakers. You can make adjustments while
listening to the currently selected source component or a
test tone.
Control range: –6.0 to +6.0 dB
Control step: 0.5 dB
Initial setting: 0.0 dB
y
Press u / d to select a frequency band and j / i to adjust the
selected frequency band.
Test tone TEST
Use this feature to make adjustments of “CENTER GEQ”
while listening to a test tone.
Choices: OFF, ON
• Select “OFF” to stop test tones and output the currently
selected source component.
• Select “ON” to output test tones from the front left and
center speakers, and adjust the tonal quality of the
center speaker.
Notes
Notes
.
EQ TYPE SELECT
CENTER GEQ
D)EQUALIZER
/ : CT GEQ
[<]/[>]:Select
p
p
.TEST>OFFON
100Hz ;;;;;; 0dB
300Hz ;;;;;; 0dB
1kHz ;;;;;; 0dB
3kHz ;;;;;; 0dB
10kHz ;;;;;; 0dB
[]/[]:Up/Down
[<]/[>]:Adjust
D)EQUALIZER
-______+
p
p