Yamaha HTR-5960 Stereo System User Manual


 
CONTROLS AND FUNCTIONS
7
INTRODUCTION
8 Cursor buttons u / d / j / i, ENTER
Select and adjust the sound field program parameters or
the “SET MENU” parameters.
9 RETURN
Returns to the previous menu level when adjusting the
“SET MENU” parameters.
0 TRANSMIT indicator
Flashes while the remote control is sending infrared
signals.
A STANDBY
Sets this unit to the standby mode (see page 31).
B POWER
Turns on this unit (see page 31).
C SLEEP
Sets the sleep timer (see page 41).
D MULTI CH IN
Selects the component connected to the MULTI CH
INPUT jacks as the input source when using an external
decoder, etc. (see page 44).
E VOLUME +/–
Increases or decreases the volume level.
F Component selector switch
Selects the operation mode of the remote control buttons
in the shaded area.
AMP
Operates this unit.
SOURCE
Operates the component selected with an input
selector button (see page 100).
TV
Operates the TV assigned to either DTV/CBL or
PHONO (see page 99).
To set the remote control codes for other components, see
page 101.
When you set the remote control codes for both DTV/CBL and
PHONO (see page 101), priority is given to the one set for
DTV/CBL.
G MUTE
Mutes the audio output. Press again to restore the audio
output to the previous volume level (see page 40).
H STRAIGHT (EFFECT)
Turns the sound field programs off or on. When the
“STRAIGHT” mode is selected, 2-channel or multi-
channel input signals are output directly from their
respective speakers without effect processing (see
page 45).
I NIGHT
Turns on or off the night listening modes (see page 40).
J SET MENU
Enters “SET MENU” (see page 85).
K ON SCREEN
Selects the on-screen display (OSD) mode for your video
monitor (see page 47).
Notes