Filter
Top Products
15
CONNECTIONS
PREPARATION
■ Connecting the speaker cable
1 Remove approximately 10 mm (0.4 in) of
insulation from the end of each speaker
cable and then twist the exposed wires of the
cable together to prevent short circuits.
2 Loosen the knob.
3 Insert one bare wire into the hole on the side
of each terminal.
4 Tighten the knob to secure the wire.
■ Connecting to the PRESENCE speaker
terminals
Connect presence speakers to these terminals.
1 Open the tab.
2 Insert one bare wire into the hole on the side
of each terminal.
3 Close the tab to secure the wire.
10 mm (0.4 in)
Red: positive (+)
Black: negative (–)
Red: positive (+)
Black: negative (–)
Red: positive (+)
Black: negative (–)