Filter
Top Products
82
SOUND FIELD PARAMETER DESCRIPTIONS
■ REV.TIME (Reverberation time)
Function: Adjusts the amount of time it takes for the dense, subsequent reverberation sound to decay by 60 dB (at
1 kHz). This changes the apparent size of the acoustic environment over an extremely wide range.
Description: Set a longer reverberation time for “dead” sources and listening room environments, and a shorter time
for “live” sources and listening room environments.
Control Range: 1.0 to 5.0 sec
■ REV.DELAY (Reverberation delay)
Function: Adjusts the time difference between the beginning of the direct sound and the beginning of the
reverberation sound.
Description: The larger the value, the later the reverberation sound begins. A later reverberation sound makes you
feel like you are in a larger acoustic environment.
Control Range: 0 to 250 msec
■ REV. LEVEL (Reverberation level)
Function: Adjusts the volume of the reverberation sound.
Description: The larger the value, the stronger the reverberation becomes.
Control Range: 0 to 100%
Reverberation Reverberation
60 dB 60 dB 60 dB
Source Sound
Reverberation time
Early Reflections
Sound Source Short
Reverberation
Long
Reverberation
Small value = 1.0 s Large value = 5.0 s
Reverberation time
Reverberation time
(dB)
60 dB
Level
Source Sound
Reverberation
Reverberation timeReverberation
delay
Time
Source Sound
Level
Reverberation level
Time
01EN_HTR-5860_U.book Page 82 Thursday, December 30, 2004 12:27 PM