Yamaha HTR-5860 Stereo System User Manual


 
65
SET MENU
ADVANCED
OPERATION
Subwoofer phase SUBWOOFER PHASE
If bass sounds are lacking or unclear, use this feature to
switch the phase of your subwoofer.
Choices: NORMAL, REVERSE
Select NORMAL if you do not want to reverse the
phase of your subwoofer.
Select REVERSE to reverse the phase of your
subwoofer.
Presence/Surround back channel priority
PRIORITY
You can select to prioritize either the surround back or
presence speakers when playing sources that contain
surround back channel signals using CINEMA DSP sound
field programs.
Choices: PRch, SBch
Select PRch to use presence speakers even when
surround back channel signals are input. The signals
for the surround back channel will be output from
surround speakers.
Select SBch to use surround back speakers when a
surround back channel signal is detected in a CINEMA
DSP program. Presence channel signals will be output
from front speakers.
Speaker level B)SPEAKER LEVEL
Use these settings to manually balance the speaker levels
between the front left or surround left speakers and each
speaker selected in SPEAKER SET (page 63).
Choices: –10.0 dB to +10.0 dB
Initial Setting: 0 dB
FL adjusts the balance of the front left speaker.
FR adjusts the balance of the front right speaker.
C adjusts the balance of the center speaker.
SL adjusts the balance of the surround left speaker.
SR adjusts the balance of the surround right speaker.
SBL
*
adjusts the balance of the surround back left
speaker.
SBR
*
adjusts the balance of the surround back right
speaker.
SWFR adjusts the balance of the subwoofer.
PL adjusts the balance of the presence left speaker.
PR adjusts the balance of the presence right speaker.
*
Instead of SBL and SBR, SB will be displayed if you selected
only one surround back speaker in SUR. B L/R SP (page 64).
)NORMALREVERSE
02ASUBWOOFER PHASE


PRch )SBch
p
p

PRIORITY
-+
.FL
FR
 C
B)SPEAKER
LEVEL
01EN_HTR-5860_U.book Page 65 Thursday, December 30, 2004 12:27 PM