SET MENU
63
English
ADJUSTMENTS
7 I/O ASSIGN (input assignment)
It is possible to assign jacks according to the component
to be used if this unit’s DIGITAL INPUT jack settings
(component names for jacks) differ from that component.
This makes it possible to change the jack assignment and
effectively connect more components.
Once you assign, you can select that component with
INPUT H / G on the front panel (or the input selector
buttons on the remote control).
■ [A] OPTICAL INPUT jack
Choices: VIDEO 1, VIDEO 2, VCR, MD/CD-R
■ [B] COAXIAL INPUT jack
Choices: VIDEO 1, VIDEO 2, VCR, MD/CD-R
Note
• When you connect a component to both the COAXIAL and
OPTICAL jacks, priority is given to the input signals from the
COAXIAL jack.
8 INPUT MODE (initial input
mode)
Use this feature to designate the input mode for sources
connected to the digital input jacks when you turn on this
unit.
Choices: AUTO, LAST
AUTO
Select this to allow this unit to automatically detect the
type of input signal and select the appropriate input mode.
LAST
Select this to set this unit to automatically select the last
input mode used for the respective source.
9 SP/PRE OUT (output source
settings)
Choices: SP, PRE
SP
Select this to direct signals to the speakers connected to
the subwoofer (SW-S100). (No sound is output from 6CH
PREOUT jacks.)
PRE
Select this to direct signals to 6CH PREOUT jacks or if
you connect your external amplifier to 6CH PREOUT
jacks on this unit. (No sound is output from the speakers
connected to the subwoofer (SW-S100).)
110_S100_59-66_EN 02.5.13, 1:35 PM63