Yamaha DVX-S100 Stereo System User Manual


 
28
RECORDING
Recording adjustments and other operations are
performed from the recording components. Refer to the
operation instructions for these components.
1 Turn on the power of this unit and all
connected component.
2 Select the source component you want to
record from.
The procedure for selecting an input source is the
same as the one described in BASIC PLAYBACK
on page 21.
3 Start playback (or select a broadcast station)
on the source component.
4 Start recording on the recording component.
Notes
Do a test recording before you start an actual recording.
When this unit is set in the standby mode, you cannot record
between the components connected to this unit.
The setting of BASS BOOST, VOLUME, 5 L/R BALANCE
on the SET MENU and DSP programs does not effect the
recorded material.
A given input source is not output to the same OUT (Rec)
channel. (For example, the signal input from VCR IN is not
output to VCR OUT.)
Check the copyright laws in your country to record from
records, CDs, radio, etc. Recording of copyrighted material
may infringe copyright laws.
It is not possible to record the sound effect created by this
units DSP processing.
While recording video images played during the DVD mode,
do not display ON-SCREEN menu. If displayed, the menu will
be also recorded.
During digital recording, Karaoke vocal and Cinema dialog
functions do not work. (See pages 35 and 36.)
If you playback a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.
Special considerations when
recording DTS software
Attempting to digitally record the DTS bitstream will
result in noise being recorded.
Timer playback/recording
This unit can perform playback or recording with an
external timer (not supplied). Refer to the operating
instructions for the component and the timer to be used.
Notes
Stored data, such as input source, will be reflected when
playback or recording with the timer.
If you do not want any sound output when recording with a
timer, turn the volume down.