Filter
Top Products
TX6n/5n/4n Reference Manual
31
Panel Operations
● Setting procedure
1. In the HOME screen, press the second-from-right function button (MENU) to access the MENU screen.
2. Use encoder A or B to select “Signal Path,” and press the [ENTER] button to access the SIGNAL PATH
screen.
3. Use encoder A or B to select the component that you want to edit, and press the [ENTER] button to access the
screen for that component.
If you selected “SP Proc” (Speaker Processor), use encoder A or B to select the component you want to edit, and press the
[ENTER] button to access the screen for that component.
4. Press the second- or third-from-left function button to access the settings for the parameter (such as CH A/B
or SL CH 1/2) that you want to edit.
5. Use encoder A to move the cursor to the parameter that you want to edit, and encoder B to edit the parameter
value.
6. If the parameter value is blinking, press the [ENTER] button to confirm the value.
Non-blinking parameter values are reflected by the amplifier in real time.