Filter
Top Products
TX6n/5n/4n Reference Manual
29
Panel Operations
■ Limiter
Here you can specify the limiter conditions for the amplifier.
● Voltage Limiter
These settings specify how the limiter will be controlled by the output voltage.
● Power Limiter
These settings specify how the limiter will be controlled by the output power.
● Limiter Gain Reduction
Parameter name Range Explanation
On ON/OFF Turns the voltage limiter on/off.
Threshold 0.0–45.0 dBu Specifies the upper threshold value for the output voltage.
Attack 1–100 ms Specifies the time over which 20 dB of attenuation will be applied after
the threshold value is exceeded.
Release 0.01–10.00 s Specifies the time over which the voltage that had been attenuated will
be returned to the original level after falling back to below the threshold
value.
Parameter name Range Explanation
On ON/OFF Turns the power limiter on/off.
Threshold TX6n: 10–4800 W
TX5n: 10–4200 W
TX4n: 10–3600 W
Specifies the upper threshold value for the output power.
Parameter name Range Explanation
A/B Link ON/OFF Specifies whether the limiter will be linked between channels. If this is
ON, the limiter of the other channel will also operate when the limiter of
one channel operates.