Filter
Top Products
10
u BASS (THR10 only)
Tone adjustment for the guitar’s sound.
Rotate the knob clockwise to enhance the
low range frequencies.
i MIDDLE (THR10 only)
Tone adjustment for the guitar’s sound.
Rotate the knob clockwise to enhance the
mid-range frequencies.
o TREBLE (THR10 only)
Tone adjustment for the guitar’s sound.
Rotate the knob clockwise to enhance the
high-range frequencies.
!0 TONE (THR5 only)
Tone adjustment for the guitar’s sound.
Rotate the knob clockwise to brighten the
sound and counterclockwise to darken it.
!1 EFFECTS
Selects one of the four different effects;
CHORUS, FLANGER, PHASER, and TREM-
OLO. Rotate the knob clockwise to increase
the amount of each effect.
* Rotate the knob fully to the left (• position) to set
the effect OFF.
!2 DLY/REV
Selects one of the four different effects; DLY
(delay), DLY/REV (delay/reverb), SPRING
(spring reverb), and HALL (hall reverb).
Rotate the knob clockwise to increase the
amount of each effect.
* Rotate the knob fully to the left (• position) to set
the effect OFF.
* When DLY or DLY/REV is selected, the TAP/
TUNER e button can be used to set the delay
time freely.
!3 GUITAR OUTPUT (THR10 Only)
Adjusts the overall volume of the guitar
sound.
Names And Functions
LEAD:
Classic British single channel tone. A
combination of a low-gain preamp section
and EL34s in the power section give rich,
controllable distortion with great midrange
definition.
BRIT HI: EL34s keep the classic British clarity
while a higher gain preamp allows you to
push the amp into serious distortion.
MODERN: Ultra high-gain input section
combined with 6L6 output section delivers
smooth, powerful distortion and awesome
power amp compression.
* The following amp types are available
only on the THR10.
BASS:
High-power all-tube design for dy-
namic, driving bass tone.
ACO: Electro-acoustic optimized input with mic
simulations for natural, clear tone.
FLAT: Flat response clean input for line
sources, tone and effect controls allow
shaping of non-guitar sources.
t GAIN
Adjusts the amount of guitar distortion.
Rotate the knob clockwise to increase the
amount of distortion.
* On the THR10, the blend function, which blends
the pickup direct sound with the mic simulation
sound, is active when ACO is selected with the
AMP r control. (Setting the blend function to its
minimum level produces the pickup direct sound
only while a maximum setting produces the mic
sound only.)
y MASTER
Adjusts the volume for the amp section.
Rotate the knob clockwise to increase
volume while reproducing compression and
poweramp distortion of the simulated amp.
* Only adjusts the volume when BASS, ACO, or
FLAT is selected with the AMP r control (THR10
only).