Filter
Top Products
En 91
HDMI
Configures the HDMI settings.
• Default settings are underlined.
■ Configuration
Enables/disables HDMI Control (p.122).
Settings
• To use HDMI control, you need to perform the HDMI Control link setup (p.122) after connecting HDMI
Control-compatible devices.
Selects a device to output audio.
• This setting is available only when “HDMI Control” is set to “Off”.
Amp
Enables/disables the audio output from the speakers connected to the unit.
Settings
HDMI OUT (TV)
Enables/disables the audio output from a TV connected to the HDMI OUT jack.
Settings
Select whether to output videos/audio (input through HDMI jacks) to the TV when
the unit is in standby mode. If this function is set to “On” or “Auto”, you can use the
input selection keys (HDMI 1–6) to select an HDMI input even when the unit is in
standby mode (the standby indicator on the unit blinks).
Settings
Selects an audio input jack of the unit to be used for TV audio input when “HDMI
Control” is set to “On”. The unit’s input source automatically switches to TV audio
when the TV input is switched to its built-in tuner.
Settings
AUDIO 1–3, AV 1–3
Default
AV1
• When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for
connecting an external device because the input will be used for TV audio input.
HDMI Control
Off Disables HDMI Control.
On
Enables HDMI Control.
Configure the settings in “TV Audio Input”, “Standby Sync”, “ARC”,
and “SCENE”.
Audio Output
Off Disables the audio output from the speakers.
On
Enables the audio output from the speakers.
Off
Disables the audio output from the TV.
On Enables the audio output from the TV.
Standby Through
Off
(When “HDMI Control” is set to “Off”)
Does not output videos/audio to the TV.
Auto
Automatically selects whether to output videos/audio depending on
the status of the connected device.
On
Outputs videos/audio to the TV.
(The unit consumes more power than when “Off” is selected.)
TV Audio Input