Filter
Top Products
En 107
APPENDIX
If you have changed speakers or have a new speaker system, use YPAO to optimize
the speaker settings again (p.27). If you want to adjust the speaker settings manually,
use “Speaker” in the “Setup” menu (p.88).
If a small child accidentally operates the controls on the main unit or remote control, the
volume may suddenly increase. This may also cause injury or damage the unit or
speakers. We recommend using “Main Zone Max Volume” and “Zone2 Max Volume”in
the “Setup” menu to set the maximum volume level for the unit in advance (p.94).
By default, the volume level when the unit last entered standby mode is automatically
applied. If you want to fix the volume, use “Main Zone Initial Volume” and “Zone2 Initial
Volume” in the “Setup” menu to set the volume to be applied when the receiver is
turned on (p.94, 95).
You can correct volume differences between input sources by utilizing “Input Trim” in
the “Option” menu (p.82).
To use HDMI Control, you need to perform the HDMI Control link setup (p.122). After
connecting HDMI Control-compatible devices (such as BD/DVD players) to the unit,
enable HDMI Control on each device and perform the HDMI Control link setup. This
setup is required every time you add a new HDMI Control-compatible device to your
system. For information on how HDMI Control works between your TV and playback
devices, refer to the instruction manuals for each device.
Input names displayed on the front panel can be changed using “Input Rename” in the
setup menu. Change input names by entering names manually, or by selecting preset
names (such as “Blu-ray” or “DVD”) (p.97).
You can protect the settings configured on the unit (such as speaker settings) by
utilizing “Memory Guard” in the “Setup” menu (p.97).
When using multiple Yamaha products, the remote control may work on another
Yamaha product or another remote control may work on the unit. If this happens,
register different remote control IDs for the devices that you want to control with each
remote control (p.104).
Frequently asked questions
The new speaker system does not provide an ideal sound
balance...
We want to set limitations on the volume control...
I want to fix the volume when turning on the unit...
The volume varies depending on the input sources...
HDMI Control does not work at all...
I want to change the input source name...
I want to prevent accidental changes to the settings...
The unit’s remote control is simultaneously controlling
another Yamaha product as well as the unit...