Yamaha RX-S601BL Stereo Receiver User Manual


 
En 80
You can configure separate playback settings for different playback sources. This
menu is available on the front panel (or on the TV screen), allowing you to easily
configure settings during playback.
1
Press OPTION.
Front display
TV screen
2
Use the cursor keys to select an item and press ENTER.
To return to the previous screen during menu operations, press RETURN.
3
Use the cursor keys (e/r) to select a setting.
4
To exit from the menu, press OPTION.
Option menu items
Available items vary depending on the selected input source.
Text in parentheses denotes indicators on the front display.
Default settings are underlined.
Depending on the region of purchase, some menu items for audio streaming services are also available.
For details, refer to each manual on the supplied CD-ROM.
Configuring playback settings for different playback sources (Option menu)
MUTE
ENHANCER
STEREO
TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
VOL.
Input Select
Input Select
Tone Control
DSP/Surround
Volume Trim
Lipsync
Signal Info
Audio In
Option
Item Function Page
Input Select (Input) Switches the input source. 81
Tone Control (Tone Control)
Adjusts the high-frequency range and
low-frequency range of sounds.
81
DSP/Surround
(DSP/Surround)
Program (PRG) Select the sound programs and stereo playback. 44
Sur.Decode
(SrDec)
Select which surround decoder is used when
Sur.Decode is selected as the program.
46
DSP Level
(DSP Level)
Adjusts the sound field effect level. 81
Adaptive DRC
(A.DRC)
Sets whether the dynamic range (from maximum to
minimum) is automatically adjusted when the
volume is adjusted.
81
Enhancer
(Enhancer)
Enables/disables Compressed Music Enhancer. 81
Volume Trim
(Volume Trim)
Input Trim
(In.Trim)
Corrects volume differences between input
sources.
82
Subwoofer Trim
(SW.Trim)
Fine-adjusts the subwoofer volume. 82
Lipsync (Lipsync)
Enables/disables the “Lipsync” setting in the
“Setup” menu.
82
Signal Info (Signal Info) Displays information about the video/audio signal. 82
Audio In (Audio)
Combines the video jack of the selected input
source with an audio jack of others.
82
Video Out (Video) Selects a video to be output with radio sounds. 83
FM Mode (FM Mode)
Switches between “Stereo” and “Mono” for FM
radio reception.
48, 56
Auto Preset (Auto Preset)
Automatically registers FM radio stations with
strong signals as presets.
49, 57
Clear Preset (Clear Preset) Clear radio stations registered to preset numbers. 50, 58
Traffic Program
(TrafficProgram)
(U.K. and Europe models only)
Automatically searches for a traffic information
station.
51
iPod Mode (iPod Mode) Switches the iPod operation mode. 63