Filter
Top Products
En 108
If you have connected a video device to the unit with HDMI, you can output
videos/audio played back on the video device to the TV even when the unit is in
standby mode. To use this function, set “Standby Through” (p.91) in the “Setup” menu
to “On” or “Auto”. You can also switch the input source using the remote control of the
unit when this function is enabled.
Use “Audio In” in the “Option” menu to change the combination of video/audio input
jacks so that it matches the output jack(s) of your external device (p.21).
Use “Lipsync” in the “Setup” menu to adjust the delay between video and audio output
(p.94).
Use “Audio Output” in the “Setup” menu to select the output destination of signals input
into the unit (p.91). Your TV speakers may be selected as an output destination.
Use “Language” in the “Setup” menu to select a language from English, Japanese,
French, German, Spanish, Russian, Italian and Chinese (p.26).
Use “UPDATE” in the “ADVANCED SETUP” menu to update the unit’s firmware (p.105).
Various functions to customize the unit are available.
• SCENE settings (p.42)
• Sound/video settings and signal information for each source (p.80)
• Various function settings (p.85)
• System settings (p.103)
I want to enjoy videos/audio played back on the video device
even when the unit is in standby mode…
The combination of video/audio input jacks does not match
an external device...
Video and audio are not synchronized...
I want to hear audio from the TV speakers...
I want to change the on-screen menu language...
I want to update the firmware...
I want to customize the unit...