Filter
Top Products
E-5
English
Loading the batteries for the
remote control transmitter
1
Remove the battery compartment cover.
(Slide the cover in the direction of the arrow.)
2 Insert 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or
equivalent) into the battery compartment.
* Installing the batteries improperly may cause
failure.
3 Replace the battery compartment cover.
Precautions for battery use
•
Insert the batteries according to the direction
indicated in the battery compartment.
•
Replace all batteries with new ones at the same
time.
•
Remove the batteries if they are weak or if the unit is
not in use for long periods.
•
Don’t mix normal batteries with rechargeable
batteries.
Proper use of the remote control
transmitter
Aim (within the range of 60° with no obstacles) the
remote control transmitter at the remote control sensor
and operate as shown.
Notes concerning use
•
Replace the batteries if control distance decreases
or operation becomes unstable.
•
Periodically clean the transmitter window on the
remote control transmitter and the sensor on the
main unit with a soft cloth.
•
Exposing the sensor on the main unit to strong light
(especially an inverter type of fluorescent lamp etc.)
may interfere with operation. In this case, reposition
the main unit to avoid direct lighting.
•
Keep the remote control transmitter away from
moisture, excessive heat, shock and vibrations.
•
The remote control transmitter’s usable range is
within 0.2m (8”) and 6m (20’) away from the sensor.
PRECAUTIONS
NOTES ABOUT THE REMOTE CONTROL TRANSMITTER
2
1
3
MINI COMPONENT SYSTEM AV–1
POWER
PUSH OPEN
OPEN
/
CLOSE
CD
TUNER TAPE
/
MD VCR VIDEO 1 VIDEO 2
/
VOLUME
MHz
K
Hz
TRACK PRESET
PRO LOGIC DSP OFF
ENHANCED MONO MOVIE
ROCK CONCERT VIDEO
DISCO HALL STADIUM
TIMER
F REP
SLEEP
AUTO ST
MEMORY
PTY HOLD
30°
30°
Remote control sensor
Within approximately
6 m (19.7 feet)