Yamaha AV1 Home Theater System User Manual


 
E-11
English
3 Fasten screws into a firm wall or wall support as
shown in the figure, and hang the holes of the
mounting bracket on the protruding screws.
* Make sure that the screws are caught by a narrow
part of the holes securely.
Note
If desired, you can hang the speaker on the protruding
screws on the wall without using the bracket.
WARNING:
Each speaker weighs 0.7 kg (1 lbs. 9 oz.). Do not
mount them on thin plywood or soft wall surface
material, as the screws may come out of the
flimsy surface, causing the speakers to fall down
and be damaged, or result in personal injury.
Do not fasten the speakers to wall with nails,
adhesives, or other unsound hardware. Long-
term use and vibrations may cause them to fall
down.
To avoid accidents resulting from tripping over
loose speaker cords, fix them to the wall.
Select a proper position on the wall to mount the
speaker and the bracket so that no one will hit
his head or face on the sticking part of the
bracket, resulting in personal injury.
SETTING UP THE SPEAKERS
65 mm
3
Tapping screw
(Available at the
hardware store)
Wall/ wall
support
Mounting
bracket
(type B)
Min.
12 mm
If you want to mount the speaker
on a commercially available
speaker stand
The provided mounting bracket (type C) which has 1
pair of screw holes (at an interval of 60 mm) are
available to mount the speaker on a speaker stand.
* Those screw holes can be used with M4 screws
only.
1 Attach the bracket to bottom of the speaker by using
the provided screw (type A) so that the convex part
of the bracket fits in grooved part on bottom of the
speaker as figured left.
2 Mount the speaker on the speaker stand by using
the screw holes on the bracket.
Note
The mounting bracket (type C) is provided for each of 5
speakers.
Mounting
bracket
(type C)
Screw
(type A)
60 mm