Filter
Top Products
E-36
LISTENING TO A RADIO PROGRAM
To recall a preset station
On the remote control transmitter:
Select the desired preset station number by pressing
the PRESET station number selector “ ” or “ ”
button.
On the front panel:
1 If “PRESET” is not illuminated on the display, press
the PRESET/BAND button once or more so that
“PRESET” lights up on the display.
2 Select the desired preset station number by
pressing the TUNER “ ” or “ ” button.
Notes
•
A new setting can be programmed in place of the
former one.
•
For every preset station, the setting of the
AUTO/MAN’L button is stored along with the station
frequency.
MPONENT SYSTEM AV–1
OPEN
/
CLOSE
CD
TUNER TAPE
/
MD VCR
/
TRACK PRESET
PRO LOGIC DSP OFF
ENHANCED MONO MOVIE
ROCK CONCERT VIDEO
DISCO HALL STADIUM
MEMORY
TIME ADJ
AUTO/MAN’L
TIMER
PRESET/BAND
HOUR MIN
REPEAT
DISPLAY
//
VIDEO 2
POWER
SLEEP
VOLUME
TEST
ON/OFF
C/R/D
CENTER/REAR
/DELAY
PRESET
TUNER
CD
DSP
LEVEL
PROGRAM
SUBWOOFER
INPUT
AMP
1
2
PRESET
Memory back-up
The memory back-up circuit prevents the
programmed data from being lost even if the AC
supply lead is disconnected from the AC outlet or
the power is cut due to temporary power failure. If,
however, the power is cut for more than one week,
the memory may be erased. If so, it can be re-
programmed by simply following the Preset tuning
steps.