Filter
Top Products
E-46
Listening to a source with effect
sounds by the digital sound field
processing (including the Dolby Pro
Logic Surround decoding)
1
Play back a source. (For source playback, refer to
the sections beginning from page 30.)
2 If no DSP program name is illuminated on the
display, press the DSP ON/OFF button so that a
name of program lights up on the display.
3 Press the PROGRAM selector “ ” or “ ” button
once or more so that the name of a desired
program appears on the sound field program
indicator.
* Whenever you press the PROGRAM selector
“ ” button, the program changes and is
displayed as figured left.
* Pressing the PROGRAM selector “ ” button
changes the programs in the reverse order.
4 If desired, adjust the delay time and the output level
of each speaker. (For details, refer to the
corresponding descriptions on pages 47 to 48.)
Notes
●
Program selection can be made to individual input
sources. Once you select a program, it is linked with
the input source selected at that time. So, when you
select the input source next time, the same program
is automatically called.
●
If you prefer to cancel the DSP, press the DSP
ON/OFF button. The sound will be the normal 2-
channel stereo without surround sound effect.
●
When STADIUM, DISCO, CONCERT HALL, ROCK
CONCERT, MONO MOVIE or CONCERT VIDEO is
selected, no sound is heard from the center
speaker.
●
When a monaural sound source is played with
DOLBY PRO LOGIC or DOLBY PRO LOGIC
ENHANCED, no sound is heard from the front
speakers and the rear speakers. Sound is heard
only from the center speaker.
USING DIGITAL SOUND FIELD PROCESSOR (DSP)
PRO LOGIC
POWER
SLEEP
VOLUME
TEST
ON/OFF
C/R/D
CENTER/REAR
/DELAY
PRESET
TUNER
CD
DSP
LEVEL
PROGRAM
SUBWOOFER
INPUT
AMP
2
4
3
PRO LOGIC
PRO LOGIC ENHANCED
CONCERT VIDEO
MONO MOVIE
CONCERT HALL
ROCK CONCERT
DISCO
STADIUM