Filter
Top Products
26
A-S2000
A-S2000
● Confirmation of Firmware Version
Confirm that the firmware is updated successfully by
checking the “Indication of Firmware Version” by the
self-diagnostic function.
For more information, refer to “SELF-DIAGNOSTIC
FUNCTION”.
● Indication of Firmware Version
• Operation procedures
Turn the “BALANCE” and “TREBLE” knobs coun-
terclockwise fully and then while pressing down
the “AUDIO MUTE” switch, set the “POWER ON/
OFF” switch to the ON position. (Fig. 6)
• Indication of Firmware Version
The INPUT selector LED indicates the firmware
version in the binary system (BCD).
"TREBLE" knob"POWER ON/OFF" switch "BALANCE" knob
"AUDIO MUTE" switch
Example) when the firmware version is [V0035]
"BALANCE" knob"TREBLE" knob
Fig. 6