Filter
Top Products
15
A-S2000
A-S2000
When checking the P.C.B.:
• Remove frame panels L/R.
• Put the rubber sheet and cloth over this unit. Then
place the P.C.B. slantingly on the cloth and check it.
(Fig. 7)
• Reconnect all cables (connectors) that have been
disconnected.
• In this unit, the ground of the amplifier unit L/R is
connected to the chassis. When the amplifier unit L/R
is removed from the chassis, connect the ground
point to the chassis, using a ground lead wire or the
like. (Fig. 7)
• It is also possible to check the amplifier unit L/R from
the bottom. (Fig. 7)
Rubber sheet and cloth
Cloth
Ground lead
Ground lead
AMP unit R
AMP unit R
AMP unit L
AMP unit L
Fig. 7