Filter
Top Products
22
A-S2000
A-S2000
Fig. 1
● Operation Procedures
to writing port /
Writing port /
(FRONT (1) P.C.B.: CB515)
Panel side L
Panel side R
RS232C cross cable /
RS232C conversion adapter /
Flexible flat cable (9P) /
SW301
FLASH
UCOM
OTHER
Serial port (RS232C) /
PC
Top cover
1. Turn off the power of this unit and disconnect the
power cable from the AC outlet.
2. Remove the panel side L/R and top cover. (Refer
to [DISASSEMBLY PROCEDURS])
3. Set the switch (SW301) of RS232C conversion
adapter to the “FLASH UCOM” side. (Fig. 1)
4. Connect the writing port of this unit to the serial port
(RS232C) of the PC with RS232C cross cable,
RS232C conversion adapter and flexible flat cable
as shown below. (Fig. 1)