Filter
Top Products
Model PA635 Page 19
© 2001 Xantech Corporation
PA635 SPECIFICATIONS
Number of channels
6
Power Output
Rated continuous power, each channel, all six channels
simultaneously driven, 20 Hz to 20kHz, at rated THD
35 Watts at 8 Ohms
Power Output
Short term continuous, each channel, 2 channels driven,
1 kHz, at rated THD
55 Watts at 8 Ohms
80 Watts at 4 Ohms
Bridged Power Output
Short term continuous, one pair driven at 1 kHz, at rated THD
150 Watts at 8 Ohms
Rated THD
< 0.08%
Damping Factor
at 50 Hz, half rated power
> 100
S/N Ratio
A-weighted, shorted inputs, ref to rated power
> 100 dB
Frequency Response
at 1 Watt, ± 3dB
12 Hz to 55 kHz
Input Sensitivity
at rated power, stereo mode, input gain (IR controlled setting)
Max: 0.5 V
Default: 1.0 V
Minimum: Off
Input Impedance
Local Inputs: 22 kOhms
Common Audio Bus Inputs: 70 kOhms
Power Source
120 VAC, 60 Hz
TMRA 30° Celsius. If this temperature is exceeded, you will
need to provide additional ventilation to ensure proper
operation.
240 VAC, 50 Hz (European version)
Power Consumption
No signal: 20 Watts
6 Channels at 1/10 rated power: 150 Watts
6 Channels at rated power: 600 Watts
6 Channels Bridged at 660 Watts
Remote On/Off and
CI Voltage/Current
+5 V to +30 VDC (16 mA at +12 VDC)
Line Fuse Rating
120 V version: 6.25 A Slow Blow 250 VAC
240 V version: 3.15 A Time-Lag 250 VAC
Dimensions
19” W x 3.5” H x 15.5” D
(483 mm W x 89 mm H x 394 mm D)
Weight
22.4 lbs (10.2 kg)