Xantech MRAUDIO8X8 Stereo Amplifier User Manual


 
MRC88 / MRAUDIO8X8 QUICK START GUIDE
08905142A
39
icon on the LCD Display and sends IR commands programmed to the button (if any) to the corresponding
source and common emitter outputs as well as Zone Emitter port.
7. Source 5-8 Selector Buttons. Pressing of Source Button selects the corresponding source’s Audio/Video
signal to be played in the Zone of the keypad pressed. Pressing of the Source Button will reverse the source
icon on the LCD Display and sends IR commands programmed to the button (if any) to the corresponding
source and common emitter outputs as well as Zone Emitter port.
8. Vol
+. Increases zone volume and moves the Volume Bar on the LCD Display to indicate volume level (non-
programmable).
9. Vol
-. Decreases zone volume and moves the Volume Bar on the LCD Display to indicate volume level (non-
programmable).
10. Mute. Mutes zone speaker output. Sends IR commands programmed to this button (if any) to the selected
source emitter, common emitter, and zone emitter outputs.
11. CH
+. Sends IR commands programmed to this button to the selected source emitter, common emitter, and
zone emitter outputs.
12. CH
-. Sends IR commands programmed to this button to the selected source emitter, common emitter, and
zone emitter outputs.
13. Status. Displays zone and system status. Allows access to Dynamic Zone Linking and Zone EQ/Balance
settings (non-programmable).
14. Select/Play, Stop, Pause, Rew, FF. Each send IR commands programmed to these buttons to the selected
source emitter, common emitter, and zone emitter outputs.