Filter
Top Products
MRC88 / MRAUDIO8X8 QUICK START GUIDE
08905142A
31
TRANSFER THE PROJECT
With all Zone IR programming confirmed, the Project can be transferred to the
MRC88. With the PC connected to either the RS232 COM or USB COM Port on
the MRC88 Front Panel:
Figure 24 – Transfer Data Window
1. In the File Menu, select Transfer Project or in the Tool Bar, click the
Transfer Project Icon.
2. The Transfer Data Window will appear. When transfer is complete, the
message: Transfer Succeeded will display in the window. Click OK.
3. The MRC88 will update itself and the keypads.
4. The System is now ready for use.
5. If the message: ‘Error while Transmitting Data…’ displays in the Transfer
Window, check connection between PC and MRC88. Confirm Com Port. See:
MRC88/MRAUDIO8X8 Installation Instructions/Troubleshooting, (Page
92) for additional information.