Xantech MRAUDIO8X8 Stereo Amplifier User Manual


 
MRC88 / MRAUDIO8X8 QUICK START GUIDE
08905142A
30
PUNCH SYSTEM (Copy IR Programming to all Zones)
Once the IR programming for Zone 1 has been confirmed, if all zones are to have
the same programming, the Zone 1 Keypad can be ‘punched’ or copied to all
zones saving valuable programming time.
Figure 23 – Punch System
1. With Zone 1 (the programmed zone) selected in the MRC88 Window, right
click any button.
2. Select Punch (System). A Punch System Level Caution Message will
appear. Click YES. All programming for Zone 1 will now be punched to all
zones.
3. Test all zones to confirm programming as described in Section: Test IR
Commands, (Page 29) in this Guide.