Filter
Top Products
MRC88 / MRAUDIO8X8 QUICK START GUIDE
08905142A
22
Universal Dragon™ can be installed using the included CD-ROM or as a
download from www.xantech.com
. Given the size of the program, it is
recommended that downloading only be done with a high-speed internet
connection. Universal Dragon™ will automatically update when a PC running
Universal Dragon™ is powered up, but it is always a good idea to check the
website for the latest version and Application Advisories before starting a new
project. To check for updates to Universal Dragon™, with the PC connected to
the internet, simply click Check For Updates in the Universal Dragon™ Help
Menu.
When finished installing Universal Dragon™ double click the shortcut on the PC
desktop to launch the program.
WHO AM I
Before starting a new project or doing any programming, it is highly
recommended that a ‘Who Am I’ procedure be performed to confirm the firmware
version of the MRC88. This will serve two purposes. One, it will confirm the
connection between the PC and the MRC88 that will be required for all
programming; and two, it will assure that the MRC is up to date with all of the
latest features and fixes.
Figure 14 – Who Am I/MRC Figure 15 – Firmware Page Link
1. Connect the included DB9 Programming Cable (Xantech P/N 05913410) to a
Serial Port on the PC and to the RS232 COM Port on the MRC88 Front Panel
or connect a USB Type-A to USB Type-B Cable (not included) to a USB Port
on the PC and to the USB COM Port on the MRC88 Front Panel.
2. In the Base Unit Menu, select WhoAmI, then MRC. The Who Am I?
Window will appear with all of the firmware version information for the MRC
and all connected keypads.
3. In the Favorites Menu, select Xantech Firmware Page. This will load the
Xantech Firmware Updates Page in the web browser.
4. Compare the firmware version from Who Am I? to the version on the
Firmware Updates Page. If the version on the Updates Page has a higher