Filter
Top Products
MRC88 / MRAUDIO8X8 QUICK START GUIDE
08905142A
21
NOTE: The MRC88 remembers the last volume setting on a power down
and returns to that level when the Zone is powered back up. The ON-VOL
feature will ensure that if the volume was turned off at a loud volume setting,
when it is turned back on it will never go above the preset level (ON-VOL)
setting as a maximum. If user preference is to have the zone always turn on
the last volume set, do not program an ON-VOL Setting.
9. Press the ADJ-OFF Button to drop out of the Z-ADJ mode. (Z-ADJ mode
will drop out automatically after 10 seconds).The Z-ADJ settings are now
saved, completing the procedure.
10. Repeat Steps 1-9 for each zone.
RESTORE SYSTEM DEFAULT SETTINGS
To restore system default levels, press the recessed Reset Button behind the
MRC88 Front Panel Access Door twice within 1 second. System and Zone
settings will be reset to the settings shown in Table 3.
PROGRAMMING – UNIVERSAL DRAGON™
NOTE: This section only covers the most fundamental aspects of MRC88
programming: Installing the software, Firmware updates, Programming and
testing source IR commands, configuring the keypad source icons and
transferring the project. For complete MRC88 programming instructions, see:
MRC88/MRAUDIO8X8 Installation Instructions/Pre-Programming the
MRC88, (Page 34) and Programming the Controller, (Page 47).
SOFTWARE INSTALLATION
Universal Dragon™ minimum requirements:
• Windows 2000/XP/Vista
• 1.5GHz Processor or better
• 512MB Ram (1GB recommended)
• 600MB* Hard drive space (more recommended as projects expand)
• .NET Framework 2.0 (included)
• Mouse, USB, RS232 ports
*600MB = 300 MB Universal Dragon™, 300MB DotNet Framework