Wolf DCX-1500I Home Theater System User Manual


 
Wolf Cinema Owner's Manual
3-10
Enable a notice upon power-up
indicating the lamp has logged a given
number of hours as specified by
the lamp limit (default is lamp specific).
1.
2.
3.
4.
5.
6.
7.
8.
Lamp Hours
Lamp S/N
Lamp Message
Lamp Limit
Lamp Mode
Power
Intensity
Iris
Lamp History
Change Lamp
Lamp
0
?
1000
Power
500
0
3
Help
Most of the controls for the projector are
accessed from within the projector’s menu
system. There are several groups of related
functions, with each group selectable from
the Main menu as shown at right. Press
Menu
at any time to display this Main menu.
On the remote keypad, either enter the
number corresponding to the function menu
you wish to access, such as
2
for the
Picture Adjustments menu, or use the
keys on any keypad to highlight
the desired option, then press
. The
corresponding function menu or pull-down
list of further options will then appear.
With a function menu displayed, navigate in a similar manner—enter a menu option number for
any numbered option, or use the keys to highlight the desired option, then press (Enter). Extra
long menus have a scroll bar on the right—use the arrow keys to access the remainder of the
menu. Locked items or items that do not pertain to the current action or condition appear dimmed
and cannot be selected.
NOTES: 1) If there is no signal present, all source-dependent adjustments are disabled. 2) After
15 minutes of inactivity, the projector leaves the menu system and returns to the presentation. 3)
The Information menu is read-only.
Whennishedwithafunctionmenu,dooneofthefollowing:
•Press
Exit
to return to the previous screen
•Press
Menu
to leave the menu system and return to the presentation
If at any time you are uncertain what to do next, press
Help
to display summary information
about the current menu or highlighted option. Press
Help
again to exit. In addition, a line of “hint”
text is included at the bottom of some menus.
On-Line Help >
Section3►Operation
1. Geometry and Position
2. Picture Adjustments
3. Channel Setup
4. Display Setup
5. Lamp
6. Information
7. PIP
8. Test Pattern
3.3 Navigating the Menus